Thursday, October 1, 2009

The TruTone......






This was the first guitar I had ever attempted to rebrace. Its a mid-sixties TruTone made by Kay....from what I understand. They were originally sold through Western Auto Stores as student guitars.








This particular one found its way to the thrift store after some rough treatment. Someone had written all over the top with a Sharpie, then tried to cover that up with gold spray paint. The price was $9.99 and since I could see by the cracks in the top, that it was at least a solid spruce top, I figured that I couldn't lose.....









First order of business was to clean off the paint and marker from the top, fingerboard and peghead. There was also a good bit of hot glue on the fingerboard and perhead...?





Next, it was time to rebrace the sound board to make it sound as good as possible. I was fortunate that this guitar already had a small hole punched in the side near the tailblock. It was just big enough to allow me to insert the long x-brace into the body without having to remove the back.


I could access the original ladder braces through the soundhole and easily popped them loose. Next, I cleaned up the underside of the soundboard as best I could and laid out the new braces by posititioning them on the soundboard and moving the X around until I reached a configuration that allowed the braces to run under each outer edge of the bridge. then I added only one belly brace. I mildly scalloped each brace before arranging them inside the soundbox and glueing them in, one at a time.


when it was all done, I reset the neck, refretted it, made a standard ebony bridge and strung it up.


The resulting sound is great and hard to believe it's coming from such a small bodied (laminated back/sides) guitar. Very midranged and punchy. It works really well for old-time music as its not as boomy as a lot of dreadnaught guitars.....



Here's the finished guitar just before I built a new pickguard for it.